English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
| Color: | |
|---|---|
| Size: | |
| Material: | |
| Quantity: | |
R704T
RE-PHER
R704T
Product model
R704T---- stands for "75u transparent PET release film (10-20g/in)."
Product composition
This release film is made of high quality PET(polyester film) as the base material and coated with silicone oil release agent on one side.
Product characteristics
1. The release stability is good, the release force floating change is small, long-term use is easy to peel;
2. Production and processing in a thousand-level purification environment with high cleanliness;
3. Uniform coating, no coating marks;
4. High residual adhesion rate (≥90%);
● Product Specifications
1. Width: 1060mm(can be customized according to customer requirements)
2. Length: 200m-4000m(can be cut and rewound according to customer requirements)
3. Core diameter (paper tube or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
● Scope of application
This product is based on transparent polyester pre-coated film, with excellent adhesion, and excellent stability, and then coated single-side ultra-light organic silicone oil PET release film, widely used in AB adhesive.
Product packaging
1. The products are generally packaged in cartons and wooden pallet
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreement
Instructions for use
1. Static electricity may be generated during the unwinding or winding process. The static electricity layer may damage the release layer, resulting in poor stripping. If necessary, perform ESD treatment on the back or use an ESD device to eliminate static electricity.
2. In order to obtain the best results, it is recommended to use the product within 6 months from the date of purchase;
3. After expiration, it must be re-tested before use;
4. Recommended storage conditions: Avoid direct sunlight, and store at an ambient temperature of 25 ° C ±2 ° C and humidity of 60%±10%.
5. When using this product, please fully study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards, and the content outside the specification cannot be guaranteed.
Product model
R704T---- stands for "75u transparent PET release film (10-20g/in)."
Product composition
This release film is made of high quality PET(polyester film) as the base material and coated with silicone oil release agent on one side.
Product characteristics
1. The release stability is good, the release force floating change is small, long-term use is easy to peel;
2. Production and processing in a thousand-level purification environment with high cleanliness;
3. Uniform coating, no coating marks;
4. High residual adhesion rate (≥90%);
● Product Specifications
1. Width: 1060mm(can be customized according to customer requirements)
2. Length: 200m-4000m(can be cut and rewound according to customer requirements)
3. Core diameter (paper tube or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
● Scope of application
This product is based on transparent polyester pre-coated film, with excellent adhesion, and excellent stability, and then coated single-side ultra-light organic silicone oil PET release film, widely used in AB adhesive.
Product packaging
1. The products are generally packaged in cartons and wooden pallet
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreement
Instructions for use
1. Static electricity may be generated during the unwinding or winding process. The static electricity layer may damage the release layer, resulting in poor stripping. If necessary, perform ESD treatment on the back or use an ESD device to eliminate static electricity.
2. In order to obtain the best results, it is recommended to use the product within 6 months from the date of purchase;
3. After expiration, it must be re-tested before use;
4. Recommended storage conditions: Avoid direct sunlight, and store at an ambient temperature of 25 ° C ±2 ° C and humidity of 60%±10%.
5. When using this product, please fully study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards, and the content outside the specification cannot be guaranteed.
