English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
| Color: | |
|---|---|
| Size: | |
| Material: | |
| Quantity: | |
Black PET Film
RE-PHER
This release film is made of black PET (polyester film) as the substrate and coated with silicone oil release agent on the surface of the PET film.
Product characteristics
1. Produced in a thousand level dust-free workshop with excellent appearance;
2. The material has moderate hardness and is easy to die cut and punch;
3. The coating is uniform and the release force is stable with little change;
4. Using special black PET as the substrate
Product specifications
1. Width: 1080mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewind according to customer requirements)
3. Inner diameter of coil core (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Applicable scope
packing of products
1. Products are generally packaged in cardboard boxes or wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreements
Instructions for use
1. During use, static electricity may be generated during unwinding or rewinding, which can damage the release layer and cause poor peeling. If necessary, anti-static treatment can be done on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to achieve the best usage effect, it is recommended to use this product within 6 months from the purchase date;
3. After expiration, it must be retested before use;
4. Suggested storage conditions: Avoid direct sunlight, store indoors at a temperature of 25 ℃± 2 ℃ and a humidity of 60% ± 10%.
5. When using this product, please conduct thorough research on the suitability of its purpose (purpose, conditions) in advance, and make your own decision on whether this product meets its standards. Content beyond the specifications cannot be guaranteed.
This release film is made of black PET (polyester film) as the substrate and coated with silicone oil release agent on the surface of the PET film.
Product characteristics
1. Produced in a thousand level dust-free workshop with excellent appearance;
2. The material has moderate hardness and is easy to die cut and punch;
3. The coating is uniform and the release force is stable with little change;
4. Using special black PET as the substrate
Product specifications
1. Width: 1080mm (customizable according to customer requirements)
2. Length: 200m-4000m (can be cut and rewind according to customer requirements)
3. Inner diameter of coil core (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Applicable scope
packing of products
1. Products are generally packaged in cardboard boxes or wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreements
Instructions for use
1. During use, static electricity may be generated during unwinding or rewinding, which can damage the release layer and cause poor peeling. If necessary, anti-static treatment can be done on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to achieve the best usage effect, it is recommended to use this product within 6 months from the purchase date;
3. After expiration, it must be retested before use;
4. Suggested storage conditions: Avoid direct sunlight, store indoors at a temperature of 25 ℃± 2 ℃ and a humidity of 60% ± 10%.
5. When using this product, please conduct thorough research on the suitability of its purpose (purpose, conditions) in advance, and make your own decision on whether this product meets its standards. Content beyond the specifications cannot be guaranteed.
