English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
| Material: | |
|---|---|
| Quantity: | |
REPHER
Product characteristics
1. Good release stability, release force floating change is small, long-term use is easy to peel;
2. Production and processing in a thousand-grade purified environment with high cleanliness;
3. The surface resistivity reaches 10^6~10^10Ω.m, with a stable effect to prevent electrostatic interference;
4. Appearance without scratches, good smoothness, no coating lines, no wrinkles, no dirt, no crystal point;
5. High residual adhesion rate (≥90%), very little silicon transfer, no impact on the performance of laminating materials, no pollution;
Product specification
1. Width: 1060mm(can be customized according to customer requirements)
2. Length: 200m-3000m(can be cut and rewound according to customer requirements)
3. Core diameter (paper tube or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application
OCA optical adhesive coating special antistatic release film (suitable for thermal curing and UV curing processes, etc.)
According to OCA optical adhesive two-sided release film peel 1/3 differential design, thickness differential design and antistatic requirements.
Product packaging
1. The products are generally packaged in cartons and wooden pallet
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreement
Instructions for use
1. Static electricity may be generated during the process of unwinding or unwinding. The static electricity layer may damage the release layer, resulting in poor stripping.
2. In order to obtain the best use effect, it is recommended to use the product within 6 months from the purchase date;
3. After expiration, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight, and store the storage in an indoor temperature of 25 ° C ±2 ° C and humidity of 60%±10%.
5. Before using this product, please fully study whether the use (purpose, conditions) is appropriate or not in advance, and decide by yourself whether this product meets its standards. The contents outside the specifications cannot be guaranteed.
Product characteristics
1. Good release stability, release force floating change is small, long-term use is easy to peel;
2. Production and processing in a thousand-grade purified environment with high cleanliness;
3. The surface resistivity reaches 10^6~10^10Ω.m, with a stable effect to prevent electrostatic interference;
4. Appearance without scratches, good smoothness, no coating lines, no wrinkles, no dirt, no crystal point;
5. High residual adhesion rate (≥90%), very little silicon transfer, no impact on the performance of laminating materials, no pollution;
Product specification
1. Width: 1060mm(can be customized according to customer requirements)
2. Length: 200m-3000m(can be cut and rewound according to customer requirements)
3. Core diameter (paper tube or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application
OCA optical adhesive coating special antistatic release film (suitable for thermal curing and UV curing processes, etc.)
According to OCA optical adhesive two-sided release film peel 1/3 differential design, thickness differential design and antistatic requirements.
Product packaging
1. The products are generally packaged in cartons and wooden pallet
2. Each box of products has a shipping label, and each pallet has a product list
3. Packaging can also be carried out according to customer agreement
Instructions for use
1. Static electricity may be generated during the process of unwinding or unwinding. The static electricity layer may damage the release layer, resulting in poor stripping.
2. In order to obtain the best use effect, it is recommended to use the product within 6 months from the purchase date;
3. After expiration, it must be retested before use;
4. Recommended storage conditions: Avoid direct sunlight, and store the storage in an indoor temperature of 25 ° C ±2 ° C and humidity of 60%±10%.
5. Before using this product, please fully study whether the use (purpose, conditions) is appropriate or not in advance, and decide by yourself whether this product meets its standards. The contents outside the specifications cannot be guaranteed.
