English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
Product Model
R518WN --- stands for "50u white non-silicon release film (900~1400g/in)."
Product Composition
This non-silicon release film is made of white double-sided matte polyester film (DuPont YG) as the base material, and the single-side coating is made of nanometer polymer resin material imported from Germany.
Non-silicon release film-structure diagram
Product Characteristics
1. The value of overweight stripping is stable;
2. No silicon transfer, high residual adhesion;
3. The coating shall be uniform without obvious coating marks;
Product Specification
1. Width: 1090mm
2. Length: 200-3000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope Of Application
This non-silicon release film overcomes some gaps in silicone oil release film and is suitable for carrier film of electromagnetic shielding film of FPC flexible circuit board and other silicon-free fields, especially for use in some special fields.
Product Packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement
Instructions For Use
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed
Product Model
R518WN --- stands for "50u white non-silicon release film (900~1400g/in)."
Product Composition
This non-silicon release film is made of white double-sided matte polyester film (DuPont YG) as the base material, and the single-side coating is made of nanometer polymer resin material imported from Germany.
Non-silicon release film-structure diagram
Product Characteristics
1. The value of overweight stripping is stable;
2. No silicon transfer, high residual adhesion;
3. The coating shall be uniform without obvious coating marks;
Product Specification
1. Width: 1090mm
2. Length: 200-3000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope Of Application
This non-silicon release film overcomes some gaps in silicone oil release film and is suitable for carrier film of electromagnetic shielding film of FPC flexible circuit board and other silicon-free fields, especially for use in some special fields.
Product Packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement
Instructions For Use
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed
