Transparent PET Non Silicon Release Film

Product composition

This release film is made from transparent PET (polyester film) as the substrate and coated with non silicone release material on one side.

Transparent non silicon release film

● Product characteristics

1. The value of overweight peeling is stable;

2. No silicon transfer, high residual adhesion;

3. The coating is uniform without obvious coating marks;

● Product specifications

1. Width: 1070mm (customizable according to customer requirements)

2. Length: 200m-4000m (can be cut and rewind according to customer requirements)

3. Inner diameter of coil core (paper or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)

Applicable scope

This transparent PET non silicon release film is suitable for making the bottom film of PET hot bending film

● Product packaging

1. Products are generally packaged in cardboard boxes or wooden pallets

2. Each box of products has a shipping label, and each pallet has a product list

3. Packaging can also be carried out according to customer agreements

Ruihua Packaging

● Instructions for use

1. In order to achieve the best usage effect, it is recommended to use this product within 6 months from the purchase date;

2. After expiration, it must be retested before use;

3. Suggested storage conditions: Avoid direct sunlight, store indoors at a temperature of 25 ℃± 2 ℃ and a humidity of 60% ± 10%.

4. When using this product, please conduct thorough research on the suitability of its purpose (purpose, conditions) in advance, and make your own decision on whether this product meets its standards. Content beyond the specifications cannot be guaranteed.