100um 6-10g /in Transparent Fluorin Release Film

Product model

R903TF---- stands for "100u transparent fluorochrome release film (6-10g /in)."

● Product composition

This kind of fluorine release film is made of transparent PET(polyester film) as the substrate and coated with fluorine silicone resin on one side.
Product characteristics

1. Uniform coating, stable release force;

2. Small thickness tolerance, high transparency;

3. Low thermal shrinkage and good flatness;

4. High residual adhesion rate (≥90%), no impact on the performance of laminating materials, no pollution;

● Product Specifications

1. Width: 1060mm(can be customized according to customer requirements)

2. Length: 200m-3000m(can be cut and rewound according to customer requirements)

3. Core diameter (paper tube or plastic tube) : 3 inches (76.2mm) or 6 inches (152.4mm)

● Scope of application

Suitable for silicone products (such as three layers of hot pressing film, gold finger tape, high temperature green tape and other silicone products of the bottom film; Silicone protective film, PI tape, silicone double-sided tape and other silicone products die cutting punch).
Product packaging

1. The products are generally packaged in cartons and wooden pallet

2. Each box of products has a shipping label, and each pallet has a product list

3. Packaging can also be carried out according to customer agreement
Instructions for use

1. Static electricity may be generated during the unwinding or winding process. The static electricity layer may damage the release layer, resulting in poor stripping. If necessary, perform ESD treatment on the back or use an ESD device to eliminate static electricity.

2. In order to get the best results, it is recommended to use the product within 3 months from the date of purchase;

3. After expiration, it must be re-tested before use;

4. Recommended storage conditions: Avoid direct sunlight, and store at an ambient temperature of 25 ° C ±2 ° C and humidity of 60%±10%.

5. When using this product, please fully study whether the use (purpose, conditions) is appropriate in advance, and decide whether the product meets its standards, and the content outside the specification cannot be guaranteed.