50um 10-20g/in Blue Anti-static Fluorin Release Film

Product Description

Product composition
This fluorine release film is made of blue PET (polyester film) as the base material and coated with fluorosilicone resin on one side.
Product characteristics
1. The coating is uniform and the release force is stable;
2. Small thickness tolerance and high transparency;
3. Low heat shrinkage and good flatness;
4. The residual adhesion rate is high (≥ 90%), which has no impact on the performance of the bonding material and no pollution;
Product specification
1. Width: 1060mm (can be customized according to customer requirements)
2. Length: 200-4000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
It is applicable to silicone products (such as the bottom film of silicone products such as three-layer hot-pressing film, golden finger tape, high-temperature green tape, etc.; the die-cutting and punching of silicone products such as silicone protective film, PI tape, silicone double-sided adhesive tape, etc.).
Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement
instructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.

5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.

RE-PHAR Technology Company is a national high-tech enterprise that integrates research and development, production, and sales. The company was founded in 2004 and Shenzhen RE-PHAR Coating Technology Co., Ltd. was established in 2013. It is currently located in Guangming New District, Shenzhen. It has multiple coating production lines and high-performance rewinding and slitting equipment, and production operations are all completed in a 10000 level dust-free workshop.

RE-PHAR Technology provides various functional materials such as single-sided and double-sided release, single-sided and double-sided anti-static, printable, protective, adhesive, etc. with various thicknesses, release forces, and colors for application industries such as tape and die-cutting, thermal conductive materials, shielding materials, consumer electronic products, absorbing materials, label printing, special coatings, and FPC/PCB circuit boards. Actively research and launch various membrane release materials, including PET, MOPP, CPP, PE release films, etc., to provide the best technical solutions for customer application requirements. At the same time, we are committed to creating an innovative development platform for the application of new materials in the coating industry, providing customers with various functional coating new materials.