English 
+86-18124562607
qw-by5@qiaowei88.com
qw-by5@qiaowei88.com
Floor 3, Building 1, Wanderheng High-tech Park, Zhenmei Community, Xinhu Street, Guangming District, Shenzhen
| Color: | |
|---|---|
| Size: | |
| Material: | |
| Quantity: | |
R504BF
REPHER
Product composition
This fluorine release film is made of blue PET (polyester film) as the base material and coated with fluorosilicone resin on one side.
Product characteristics
1. The coating is uniform and the release force is stable;
2. Small thickness tolerance and high transparency;
3. Low heat shrinkage and good flatness;
4. The residual adhesion rate is high (≥ 90%), which has no impact on the performance of the bonding material and no pollution;
| Test items | Standard value | Test standards | Remark |
| Substrate | PET | ASTM D3652 | / |
| Color | Blue | / | / |
| Appearance | No dirt, wrinkles, scratches | visual inspection | / |
| Release agent | Fluorosilicone | / | / |
Product specification
1. Width: 1060mm (can be customized according to customer requirements)
2. Length: 200-4000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
PET fluorine release film has a flat and smooth surface, even coating, and no defects such as wrinkles, tears, particles, bubbles and pinholes. The product is widely used in the field of adhesive products, die-cutting and punching processing, medical dressings, electronic and electrical appliance manufacturing and other industries, mainly for the release of silicone.
Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreementinstructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.
About us
ShenZhen RuiHua coating Technology Co., Ltd. was established in 2017. It is an integrated high-tech enterprise specializing in R&D, production and sales of high-end adhesive materials, protective films and precision die-cutting. It has a number of utility model patents and passed I S O 9 0 0 1 quality Management system , with rich research and development technology, advanced intelligent high-speed coating machine, rewinding machine,laminating machine, slitting machine and die-cutting combination line, rich coating Fabric, die-cutting technology and first-class testing equipment; its series of products have passed third-party certification and meet environmental protection standards in all walks of life; products are widely used in electronics, circuit boards, automobiles, computers, batteries, medicine, mobile phones, spraying, insulation , Die-cutting, electroplating, home appliances and other fields.
FAQ
Product composition
This fluorine release film is made of blue PET (polyester film) as the base material and coated with fluorosilicone resin on one side.
Product characteristics
1. The coating is uniform and the release force is stable;
2. Small thickness tolerance and high transparency;
3. Low heat shrinkage and good flatness;
4. The residual adhesion rate is high (≥ 90%), which has no impact on the performance of the bonding material and no pollution;
| Test items | Standard value | Test standards | Remark |
| Substrate | PET | ASTM D3652 | / |
| Color | Blue | / | / |
| Appearance | No dirt, wrinkles, scratches | visual inspection | / |
| Release agent | Fluorosilicone | / | / |
Product specification
1. Width: 1060mm (can be customized according to customer requirements)
2. Length: 200-4000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
PET fluorine release film has a flat and smooth surface, even coating, and no defects such as wrinkles, tears, particles, bubbles and pinholes. The product is widely used in the field of adhesive products, die-cutting and punching processing, medical dressings, electronic and electrical appliance manufacturing and other industries, mainly for the release of silicone.
Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreementinstructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.
About us
ShenZhen RuiHua coating Technology Co., Ltd. was established in 2017. It is an integrated high-tech enterprise specializing in R&D, production and sales of high-end adhesive materials, protective films and precision die-cutting. It has a number of utility model patents and passed I S O 9 0 0 1 quality Management system , with rich research and development technology, advanced intelligent high-speed coating machine, rewinding machine,laminating machine, slitting machine and die-cutting combination line, rich coating Fabric, die-cutting technology and first-class testing equipment; its series of products have passed third-party certification and meet environmental protection standards in all walks of life; products are widely used in electronics, circuit boards, automobiles, computers, batteries, medicine, mobile phones, spraying, insulation , Die-cutting, electroplating, home appliances and other fields.
FAQ
